The dust-containing gas is conveyed by the fan into the dust collector. The large particles of dust are separated and fall directly into the ash hopper. The remaining light dust is evenly distributed with the airflow through the shunt baffle, and then filtered by a high-density filter bag. The filtered clean gas Drain into the atmosphere from the exhaust hood; as the filtering conditions progress, dust will accumulate on the surface of the filter bag, and when the dust accumulates to a certain amount, the dust will automatically fall off, and the dust on the remaining filter bag will be removed by the air pressure pulse cleaning device For cleaning, this cleaning device can be set: 1. Automatic cleaning (when the production line stops or the gap is stopped, the air pressure pulse cleaning device will automatically open for cleaning, and once the production line starts, the device will automatically shut down at the same time); 2. Scheduled cleaning; 3. Manually control the cleanup. Turn on the air source to clean up according to the set program, and shake off the dust on the filter bag. The dust falling into the ash hopper is discharged by the conveying system. Normally stop dust to discharge, you can also customize the dust collector to discharge dust automatically when the production line is turned on according to the customer's requirements, or when multiple dust collectors are turned on, the dust collector can be used to discharge the dust and air flow to convey the concentrated dust package.